Apax Lab TDS Meter — Water TDS & Temperature Tester
Measure Your Water, Master Your Brew

Water makes up more than 98% of every cup, so knowing what's in it matters. The Apax Lab TDS Meter is a simple, reliable 2-in-1 tool that gives you an estimated total dissolved solids (TDS) reading and a temperature reading in seconds. Use it to check your base water, confirm your remineralized water after adding Apax Lab concentrates, compare recipes and brew with real repeatability. It's the easiest way to take the guesswork out of your water and make a proper cup, every time.

Features

• TDS Reading Estimates total dissolved solids from your water's electrical conductivity
• Temperature Reading Check that your water is at the right temperature for an accurate measurement
• Hold Button Freezes the reading on screen so you can remove the meter and read it with ease
• x10 Indicator A flashing "x10" icon tells you to multiply the displayed value by 10 for higher readings
• Protective Cap Keeps the probe clean and protected between uses

How to Use

• 1. Switch On Remove the protective cap and press ON/OFF. The display should read "000"
• 2. Immerse Dip the probe into water at about 25°C, no deeper than 5cm
• 3. Read Wait 10 to 30 seconds for the reading to stabilize, then press HOLD
• 4. Clean & Store Switch off, shake off excess water or wipe the probe with a clean tissue, and replace the cap

Details

• Measures Estimated TDS and water temperature
• Best Used For Checking base water, verifying remineralized water, diluting concentrates and comparing recipes
• Pairs With Apax Lab KONFLUX, TONIK, JAMM, LYLAC and custom profiles, especially with demineralized, distilled or low-TDS water
• Ideal Test Temperature About 25°C. Not for use in hot water
• Please Note Gives an estimated total reading and does not identify individual minerals